IR IP Camera FAQs

IR IP Camera FAQs
Network camera will appear in the process of using the snow, now vstarcam compiled some effective solution, concluded the following way to snow this problem can be resolved infrared IP Camera. Details are as follows:
1: Infrared lamp of the device in the future, we must start from scratch setting circuit and aging; condenser problems focus on the infrared lamp viewpoint; installed officers of this needs a proper sense of responsibility and patience;
2: Built-in camera minimum 0.1 illumination, or simply present snowflakes; necessary input and careful disposal resolved this demand vendors acquisition;
3: Long-distance infrared network camera infrared lights are usually relatively large power, usually use a 220V power supply camera built-in high-quality transformers and fans;
4: To use high-quality infrared light, the infrared lamp eradicate power is too large garish perhaps whitened appearance presented; to incur the picture is not clear, perhaps dark gray flu; focus on the the IR LED viewpoint and intervals with and focus on its life expectancy;
5: Anti astigmatism and excessive light gathering astigmatism simple rendering vast expanse, and set light the simple rendering flashlight appearance.
These snowflakes problem solution for IR IP camera the Vstarcam finishing.
If you encounter other problems in the use the Weishi QLDK network camera products, welcome to contact us.
Plug Play IP Camera HD IP Camera IP Camera Network Camera manufacturer :http://www.vstarcam.com