IP network camera for everyday use "Note"

IP network camera for everyday use "Note"
The Network Camera are increasingly recognized, it slowly into everyone's living environment.
Network Camera act as the eyes in the security monitoring, complex environment, mostly outdoor and harsh environment, if you use improper maintenance is bound to accelerate the speed camera on aging and retirement. The unique structure of the network camera, the following precautions.
1 Do not attempt to disassemble the camera
Network Camera generally specialized factory to produce precision constructed, no user-serviceable parts inside the machine, non-essential, myself not disassemble the camera, do not remove screws or protective case of failure, should directly contact are eligible maintenance personnel or sent directly to the camera overhaul of the maintenance department.
Blindly demolished consequences: ranging from touching the internal parts, easy camera damage, failure to expand, resulting in a greater loss, damage dealer estimated also does not give any warranty. Weight is caused by an electric shock, the consequences could be disastrous.

2 to be careful to use the IP Camera
Do not mess with the camera, should be avoided by the collision or vibration. Camera if used or stored improperly, will be subject to damage. Avoid material contact of the camera and the oil, steam, water vapor, moisture and dust, etc., and water to avoid direct contact. Do not pull and reverse cable, similar action might cause damage to the camera.
Do not install the camera upside down, for example, the camera is designed to be installed on the ceiling or wall upside down installation mounted on the floor, etc., cause the camera to malfunction.

When cleaning the IP Camera body, please do not use strong or abrasive detergents, and organic solvents to clean the camera
Camera dirt, wipe with a soft dry cloth. If the dirt is more severe, with a neutral detergent gently smear. When wiping Please be careful not to scratch the round protective cover. Then with a dry cloth to wipe off the residual portion of the detergent, warehousing, the camera should be stored in a clean, dry place.

Do not camera aimed at the sun
Do not aim the camera at bright objects. Whether the camera is in use or non-use, absolutely not aim it at the sun or other extremely bright objects. Otherwise, it will damage the camera's image sensor device may cause image blur or smear. Never camcorder a long time at places exposed to the light source under spotlights and other point light spot formed on the display screen, part of the image will fade because of the deterioration of the CCD color filter change of face in the camera case.
5 Do not use the IP Camera out of temperature, humidity and power supply in the state
Do not use the camera in the extreme environment of high temperature and humidity. Do not put close to, such as heating, stoves, or other heat-generating equipment and other attachments.
Do not install the camera near the outlet of the air conditioners
In the following cases, the lens because of condensation and fogging.
Opened by the air conditioner when shut due to rapid temperature changes in the level.
Open by the door shut due to rapid temperature changes in the level.
Make glasses fogging environment.
In a room filled with smoke or dust.
If the lens because of condensation and fogging, remove the cover with a soft cloth to wipe away all the moisture in the surface.
7. Consumables
The contact member, such as a lens drive motor, the cooling fan motor, and installed inside the slide ring, due to prolonged use and wear. With regard to the replacement and maintenance of these components, please consult a nearby repair center.

Not a long time the IP Camera facing the same object on the screen of a cathode ray tube to burn out a shadow of the object.
Good habits, you can lengthen the life of the Network Camera.
Plug Play IP Camera HD IP Camera IP Camera Network camera manufacturer website:http://www.vstarcam.com