Home HD IP Camera maintenance and use of items

Home HD IP Camera maintenance and use of items
Try not to wet the obvious place to install temperature changes
For the surveillance cameras, the screen can be said fog often troubled one of the problems of our work. The occurrence of fog, are generally related to changes in the surrounding environment. For example, frequently changing the ambient temperature or the ambient environment has a much dust in the case of smoke, will induce fogging phenomenon. So we choose the camera installation site, it is best to avoid the surrounding air, or water vapor and dust more places and so on.
In fact, for high-definition IP Camera, because it constitutes the structure has been rendered more precise trend, so I'm afraid to understand surveillance cameras friends may find, and now we have been able to do less and less work. Course, this also and related product technology level of ascension has a great relationship. However, this rookie class for users who are not a bad thing, because this also means that we in the future monitoring work, you can enjoy high-tech to bring us more convenience, so that we in the small monitor help, you can reap more more satisfying.
Try cleaning the lens without water
If you want to Speaking of HD Network Camera the core component of, I am afraid almost everyone will pointed out that the of the lens importance of the. So So critical equipment maintenance how should we do?
Network monitoring equipment for the home, because of the lack of field applications are often special protection, so instead the most vulnerable to the surrounding dust pollution. For monitoring the lens clean, we are as far as possible to avoid them clean with a liquid, to avoid water droplets into the lens or the lens damp phenomenon. Of course, if we are more dirt, cleaning liquids have required. We are also sure to use a neutral detergent to spray on a dedicated cleaning cloth to wipe. And finished wiping with a dry cloth to wipe the lens residual moisture to prevent the lens appear damp phenomenon.
Tells of a small screw precision of network monitoring
There was a time, once rumored alcohol wipe some of the glass surface has a good effect. But for the surveillance camera lens, the alcohol because it had a strong corrosive, it is absolutely do it can be wipe the lens surface. For cleaning the lens, it is best choice blowing sub remove surface dirt better.
Regardless of the switch should avoid strong light source
Although most of today's high-definition Network Camera are equipped to deal with obvious bad light WDR function, however, as the distinction between the general environment illumination remedies or difficult withstood intense light "direct challenge" to. Many users may believe that the working conditions of the camera, are not directly facing the light captured. However, in case of shutdown, they do not pay attention to these elements in it?
In fact, whether the camera is in use or turned off, the sun will not be for a long time in front of the scene, or other bright light. Otherwise, a very high light sensitivity of the optical apparatus, continuous light image sensor is likely to cause damage to the device, cause image blur or produce halo phenomena. For continuous shooting under light camera, the display screen is easy to form a light spot, while the part of the image will change as the camera face of the ccd such circumstances filters work environment cause discoloration phenomenon. And that all of the equipment is a fatal injury.
Not easily remove surveillance cameras
For traditional analog cameras, because it has experienced a long period of development and application. Therefore, either the user or the application of technology in terms of structure, have reached a point where very skillful. So many users have experienced a relatively simple solution to their own use of analog cameras in trouble.
While the For the high-definition IP Camera speaking, due to higher technical content, more sophisticated tectonic, Currently, the device the internal has basically been circuit boards well as a variety electron tubes replaced by the. Thus, in the case is not necessary, it is best not to disassemble the body, or remove the shell. So as to avoid because they do not familiar with internal structure of the, lead to other components for damage during, to make fault to expand. This result is clearly not worth much.
Welcome to the P2P IP Camera manufacturers VStarcam website: http://www.vstarcam.com more information!